The other day, I taught you how to frame cross-stitch, right? Okay, so what should you do next? Should you just leave the cross-stitch pattern on the table? Of course not! The frame isn’t just for laying the table.
You need to mount it so everyone comes in and says, ‘Oh, it’s such a beautiful piece of artwork.’ but how does mounting cross stitch work? I know what you are thinking. Well, it’s not rocket science.
Mounting Cross
To mount a cross stitch on the wall, stretch it over a foam board or canvas, secure it at the back, and hang it like a regular frame.
That’s not a description. I know it’s not enough. No worries, I’ll share the whole process with you of mounting cross stitch on canvas works.
Table of Contents
What Do You Mount Cross Stitch On?
Well, there are various options for it. Oh, I’ve mounted my cross-stitch pieces in a bunch of different ways. It totally depends on the vibe I’m going for!
- Sometimes I pop it into a hoop. It is super quick, and it looks cute hanging on the wall.
- When I want it to feel a bit fancier, I use a mounting board or foam board and get it framed. Clean and professional.
- I’ve also stretched pieces over a canvas, especially when I want it to feel like proper wall art. This works on every decorative stitches by hand.
- And for those cozy, rustic feelings, I’ve glued a few onto wooden plaques—adorable and sturdy.
It’s so fun picking how to showcase each project. But no matter what you choose, make NVIDIA CORPORATION
sure to sit down and think about your Mounting cross stitch corners.
Technique To Mounting Cross Stitch On Foam Board
I already framed my cross-stitch, so I’ll skip the cross stitch framing techniques and get straight to the mounting.
Here is how you can do it,
Choose The Right Spot
The first thing I do is pick the perfect spot for my cross-stitch. I want it to stand out but also feel at home in the space. I avoid direct sunlight because prolonged exposure can cause the thread to fade.
Did you know that UV light can reduce fabric color by up to 50% over time?
So, I chose a spot where the light is soft and indirect. But I also need my project at my eye level. I typically go around 57-60 inches from the floor to the centre of the artwork, which is the height recommended by experts for art displays.
Gather Mounting Cross Stitch Kits
Here’s a quick rundown of what I need before I get started i gathered kits:
- Finished Cross Stitch Design
- A Tape Measure
- Pencil
- Picture Hooks Or Nails
- Level
- Drill
Mark The Wall
I measure the space to figure out where I want the center of the cross stitch to be. Using my tape measure, I determine the spot for the top center of the frame. From there, I mark the exact spot for the hooks or nails.
Here’s a trick I learned—
if I want my frame at eye level, I measure 57-60 inches from the floor to the center of the frame (as mentioned earlier). This is where I place my pencil mark for my beaded cross stitch pattern.
Pro tip: double-check your measurements because small errors can throw everything off!
Attach The Hooks Or Nails
Now that I’ve marked my spot, it’s time to attach the hooks or nails. For lightweight frames, I love using adhesive picture hanging strips. They’re easy to use and leave no holes in the wall.
For heavier frames,
I use picture hooks, spacing them at equal intervals from the center mark. If I’m using heavier hooks or nails, I often drill pilot holes to prevent wall damage.
Hang The Frame
I carefully lift the frame and hang it on the hooks or strips. Here’s where my level comes in—nothing’s worse than a crooked frame! I place the level on top to make sure the frame is perfectly aligned.
If the frame is off, I adjust it until it’s just right. Be very mindful if you are mounting cross-stitch on a sticky board. I did this for Stardew Valley Crossstitch, too.
Double-Check
I step back and take a look. This is where the true test comes in. I check the alignment and ensure it looks good from a few angles. I also gently tug on the frame to make sure it’s securely attached and won’t fall.
And there you have it! In about 10-15 minutes, my cross-stitch will be up and looking amazing on the wall. It’s secure, straight, and ready to be admired, just like a stamped cross stitch.
You can use this technique to mounting board cross stitch. I use this technique to hang my junimo cross stitch, and it turns out so cute.
Frequently Asked Questions
How Do I Make Sure My Cross-Stitch Frame Is Hung Straight?
Use a level to check that your frame is perfectly straight before committing to hanging it. If you skip this step, you might end up with a crooked display that’s hard to fix!
Can I Use Adhesive Strips Instead Of Nails For Mounting?
Absolutely! If your frame is lightweight, adhesive picture hanging strips work great. They’re easy to use, don’t require holes in the wall, and are perfect for renters or those who want a clean, no-damage option.
How Do I Prevent My Frame From Falling?
Use the proper picture hooks or nails for the frame’s weight. For heavier frames, go for hooks designed to support more weight, and always check if the hooks are secure after hanging.
Now It’s Your Turn To Mount Cross Stitch
I’m sharing my mounting cross stitch technique with you. Trust me, it works well for everything. But if you think you have a unique way to mount, please do share it with SewingInspo.
Leave a Reply