I love to add new stitching techniques to my book every day. So, my next stop is a double blanket stitch. This one doesn’t need any special technique. This is one of the simplest of all types of stitches. Curious how to do it?
Well,
Double Blanket Stitch
To do a double blanket stitch by hand, sew a basic blanket stitch and then add a second row of blanket stitches connecting the loops of the first row for a layered effect.
I know you are getting more curious about it. Now, let’s get into the details process.
Main info:
- Double blanket stitch is a common sewing stitches for embroidery.
- There are 3 methods to do double blanket stitching.
- The overlapping double blanket stitch is the most attractive one.
Table of Contents
Steps To Do Double Blanket Stitches For Beginners
To do a double blanket stitch, follow 4 steps:
- Mark A Parallel Line With Dots
- Insert The Needle From The Back Of The Fabric
- Insert The Needle A Short Distance From Above
- Insert The Needle Midway Between Two Base Blanket Stitches
Mark A Parallel Line With Dots
I marked a parallel line with dots, and it was pretty simple.
First, I decided where I wanted the line and ensured the baseline was clear. Then, I checked that the ruler was straight and even. This step will even help you in the germen knotted blanket stitch.
After that, I made small dots with a pencil along the ruler’s edge ¼ inch space them evenly. This will give you a kick start to sew a stitch.
Insert The Needle From The Back Of The Fabric
I inserted the needle from the back of the fabric to start my stitch.
I pulled it through carefully until the thread was locked, holding the knot at the back. This created a clean starting point for my stitching on the front side of the fabric.
For a perfect and secure look, you must select the right size & type of needle. The market is filled with many kinds of needles.
Among those, I prefer to use 7 size Milliners needle for a double blanket. Cause it’s sharp and not so thick, it fits perfectly in hand.
For the thread, I use size 8 pearl cotton thread. This is perfect to make the thread stand out.
Insert The Needle A Short Distance From Above
Insert the needle a short ¼ inch distance away from the above. This distance depends on the Blanket stitch forms. I’m creating—usually around 1/4 inch or less for fine work. It’s perfect for sewing a blanket stitch.
I held the fabric steady with one hand and guided the needle with the other, pushing the needle into the above fabric.
I ensured the stitch length was consistent with the previous ones to keep the pattern uniform. While pulling the thread through, I avoided tugging too hard, which could distort the fabric or create uneven tension.
But don’t pull it down. Before pulling the thread completely tight. Leave a small thread loop visible on the fabric’s front side.
Bring the needle up from underneath the loop, catching it with the needle tip. Pull the thread gently until the loop tightens, forming a secure stitch along the fabric edge.
This will create the Blanket stitch styles. Now, repeat this process for the whole rows of blanket stitches.
Insert The Needle Midway Between 2 Base Blanket Stitches
Now, it’s time to create the double effect.
I Insert the needle midway between 2 base blanket stitches and start the 2nd layer. I carefully found the centre point at the bottom of the first row of stitches.
I inserted the needle into the fabric at this spot and gently pulled the thread through. It creates the starting point for the second layer.
Next, to form the interlocking design, I brought the thread over the previous stitch and inserted the needle at the base of the next stitch in the first row.
This motion created a looping effect, adding depth and detail to the overall stitch. I repeated this process, ensuring each loop aligned perfectly over the base stitches. Repeat this until it’s done. And end a stitch by hand with a knot.
Note: Pay close attention to each stitch’s spacing, tension, and alignment, adjusting slightly if needed. Take time to adjust it right.
That’s how you do a double blanket stitch. Here is an embroidery stitch lesson if you are feeling lost.
Double Blanket Stitch | Hand Embroidery Stitch.
Other Method To Do Double Blanket Stitch
That’s the basic way to do a double blanket stitch, and almost every stitcher does it this way. However, since I like to experiment and present something unique to my sewing inspo readers, I found some different ways to double blankets, too. 😜 here is how:
Double Blanket Stitch Inverted Alignment
This creates a different look for this stitch. I use this to add a different touch to my embroidery. Here is how to do it:
- Position your needle slightly away from the top of the first row, ensuring the second layer doesn’t overlap but complements it most among different blanket stitch styles.
- For each stitch in the second row, align it between two stitches of the first row.
- This positioning creates a mirrored effect, making the second row appear to reflect the base layer upside down.
- Keep the distance between the first and second rows even for a balanced look.
- Consistency in spacing will ensure the stitches align neatly and maintain symmetry.
- Pull the thread evenly to avoid puckering or uneven loops.
- Check frequently to ensure that each stitch in the second row matches the alignment of the first row.
Overlapping Layer Placement Of Double Blanket Stitch
The second layer overlaps the base row stitches in this variation, extending partially onto the fabric for a bold, textured look. You can do many embroidery designs with this blanket stitch. Here is how to do it:
- I anchored the thread near the top of the first base stitch, closer to the fabric edge, to start the second layer.
- For each second stitch, I extended it slightly onto the fabric, placing it just above the loop of the base stitch.
- Unlike crossed blanket stitch, I inserted the needle farther into the fabric and pulled the thread through, ensuring the second stitch overlapped the top of the base stitch neatly.
- Moving along the row, I ensured each second-layer stitch slightly overlapped its corresponding base stitch.
- I kept the overlaps uniform in size and maintained consistent thread tension to keep the design polished.
- Once I finished the row, I tied a secure knot at the back of the fabric and trimmed off any excess thread.
Double Blanket Stitch Pdf
Having types of hand stitches with pictures pdf is really helpful. So download this and save it for later lessons with step.
Frequently Asked Questions(FAQ’s)
Can I Use Different Colors For The Two Layers?
Yes, using contrasting colored thread colors for the first and second layers can create a visually striking design and add depth to your stitching.
What Type Of Thread Works Best For A Double Blanket Stitch?
Embroidery floss, cotton thread, or any sturdy thread works well. Choose a thread type and thickness that matches your fabric and project requirements.
How Do I Secure The Thread At The End?
To finish the stitch, tie a small knot on the backside of the fabric and trim any excess thread. This ensures the stitch won’t unravel.
Final Thought
Learning the Double Blanket Stitch has been a fun and rewarding experience for me! It’s not just about finishing fabric edges—it’s about adding my personal touch and creativity to every project. Whether I’m trying out different placements, experimenting with colors, or just enjoying the process. Which one is your favorite so far? Let us know and share your embroidery projects.
Leave a Reply